Ruby Creek is the 45-home Riverwood phase completing Crimson Point, off Shayla Avenue. New arrays are not clean arrays, and the first clean on a newly commissioned system is worth more than most owners realise.
Panels installed during or shortly after construction spend their first weeks in the dustiest environment that property will ever have: concrete cutting, drywall sanding, framing sawdust and general site dust. Much of that is on the glass when the system is commissioned, so the baseline production figures the owner starts comparing against are already depressed. Cleaning early establishes an honest baseline, which matters because every future soiling assessment is measured against it.
Drywall and concrete dust are far finer than soil, so they spread into a thin continuous film rather than scattered grains, and a uniform film shades the entire cell surface. That costs proportionally more output than the same mass of coarse dust would, and it is close to invisible from the ground because there is no contrast to see. Owners look for visible dirt, find none, and never suspect the array.
The anti-reflective coating is the reason a panel performs to specification, and on a new array it is pristine. Cleaning it with anything abrasive, or with a brush over grit, scratches it permanently and costs output for the life of the system. It may also give the manufacturer an argument about a warranty claim later. Panels are flooded with pure deionized water, which lifts soiling and dries leaving nothing behind, and nothing abrasive touches the glass.
As the third and final phase of a 45-lot development, Ruby Creek is largely past the continuous construction dust that keeps reloading arrays through a 450-lot build-out, so once the first clean establishes a baseline, an ordinary interval is realistic. Solar panel cleaning is quoted by array size, after we look at how the array is mounted and accessed.
Free, no-obligation quote — we'll call or text you with your price.
Get My Free QuoteStill wondering about something? Call or text us at (208) 453-6760.
Because they spent their first weeks in the dustiest environment the property will ever have: concrete cutting, drywall sanding and site dust. Much of that is on the glass at commissioning, so the baseline figures you start comparing against are already depressed.
Because every future soiling assessment is measured against your early production figures. If those were recorded with a dusty array, you will underestimate later soiling losses. Cleaning early establishes an honest baseline to compare against.
Drywall and concrete dust are much finer than soil, so they spread into a thin continuous film rather than scattered grains, and a uniform film shades the whole cell surface. It is also nearly invisible from the ground, so owners never suspect it.
Abrasive cleaning could. Scratching the anti-reflective coating permanently reduces output and may give the manufacturer an argument about a later claim. Panels are flooded with deionized water with nothing abrasive touching the glass, which is the safe approach on a new system.
No. As the final phase of a 45-lot development, Ruby Creek is largely past the continuous construction dust that keeps reloading arrays through a big build-out, so after the first clean an ordinary interval is realistic.
Free, no-obligation quote. Next-day slots available.
Get My Free Quote