Concrete in Crossroads carries four stains that need four approaches. The subdivision sits in east Meridian between Eagle Road and Cloverdale south of Fairview in 83642, and it is a turn-of-the-2000s subdivision, recorded 1994–1999 across 7 phases. About 78 acres, compact enough that we can usually do several homes in one visit, and that scale is part of the quote. Sprinkler water comes off the Boise Project Board of Control's system, not the city main.
Mon–Sat 7am–7pm · most quotes answered within the hour
Crossroads is a turn-of-the-2000s subdivision, recorded 1994–1999 across 7 phases (ZIP 83642, about 78 acres). Flatwork here carries a specific mix. Irrigation overspray leaves a white mineral bloom along driveway and walkway edges — the same canal mineral that rings the windows. Rust-orange streaking comes from the iron in that same water, and it is a different removal problem entirely from dirt. Add vehicle drip in the driveway apron, organic darkening where a downspout discharges, and Eagle Road traffic film — brake dust and diesel particulate carried off the busiest arterial in Ada County settling into the surface pores, and you have four stains that respond to four different approaches. We see it most consistently on the homes along E Eisenhower Dr.
We run a rotary surface cleaner on flatwork rather than waving a zero-degree tip. A wand leaves striping — those parallel arcs you see on a badly washed driveway are wand marks etched into the cream layer, and they are permanent. The surface cleaner holds even pressure across the full width and produces a uniform result. Edges and tight spots get wanded deliberately at reduced pressure to blend rather than cut. Being this close to Fairview means the road-facing elevation is always the one that needs the most attention.
Not everything gets the same pressure. Pavers lose joint sand if you hit them hard, and a paver patio washed aggressively will need re-sanding and may shift. Stamped and colored concrete has its color in a thin surface layer that strips. Sealed surfaces cloud. We drop pressure for all of it and tell you upfront when the honest answer is that a surface should be cleaned gently and resealed rather than blasted clean. We service Crossroads on our regular Meridian route.
This pairs naturally with house washing, and doing both on one visit is cheaper than two separate trips — the setup and the drive are most of the fixed cost. It is also better work: there is an order these jobs should happen in, and doing them on separate days usually means doing one of them twice. Tell us what you want when you book and we will sequence it properly.
Pressure removes dirt. It does not remove deep oil that has soaked into the slab, it will not restore spalled or crumbling concrete, and we will not blast colour off stamped or sealed surfaces to make a before-and-after look better. Reflekt has been operating since April 2025, which is a shorter history than some of the companies you may be comparing us against. We would rather you knew that up front.
Free, no-obligation quote — we'll call or text you with your price.
Get My Free QuoteStill wondering about something? Call or text us at (208) 453-6760.
Not done properly. Damage comes from a narrow tip held too close, which etches the surface permanently. A rotary surface cleaner at appropriate pressure does not do that. Pavers and stamped concrete get lower pressure by default.
Usually, yes — but with chemistry rather than pressure. Iron staining from irrigation water needs an acid treatment and a neutralizing rinse. It is quoted separately from the wash because it is genuinely separate work.
$0.20 per square foot for standard flatwork. Rust and mineral treatments are quoted on top after we see them. Booking it alongside house washing saves a trip.
An outside spigot, yes. We bring our own equipment and power. If your spigot is on the irrigation system rather than city water, let us know — we need the treated line.
Free, no-obligation quote. Next-day slots available.
Get My Free Quote