Concrete in Stetson Estates carries four stains that need four approaches. The subdivision sits in south Meridian between Ten Mile and Linder south of Victory in 83642, and it is a turn-of-the-2000s subdivision, recorded 1999–2001 in two phases. The Boise Project Board of Control supplies the pressurized irrigation on these lots. At roughly 214 acres it is one of the larger communities in the city.
Mon–Sat 7am–7pm · most quotes answered within the hour
Start with the build stage — Stetson Estates is a turn-of-the-2000s subdivision, recorded 1999–2001 in two phases (ZIP 83642, about 214 acres). Flatwork here carries a specific mix. Irrigation overspray leaves a white mineral bloom along driveway and walkway edges — the same canal mineral that rings the windows. Rust-orange streaking comes from the iron in that same water, and it is a different removal problem entirely from dirt. Add vehicle drip in the driveway apron, organic darkening where a downspout discharges, and valley dust, plus the winter inversion that holds particulate down at ground level for weeks at a time settling into the surface pores, and you have four stains that respond to four different approaches. Across roughly 214 acres it is remarkably consistent — Stetson Estates is one job, not thirty different ones.
We run a rotary surface cleaner on flatwork rather than waving a zero-degree tip. A wand leaves striping — those parallel arcs you see on a badly washed driveway are wand marks etched into the cream layer, and they are permanent. The surface cleaner holds even pressure across the full width and produces a uniform result. Edges and tight spots get wanded deliberately at reduced pressure to blend rather than cut. That holds across 83642 generally, not just on this plat.
Not everything gets the same pressure. Pavers lose joint sand if you hit them hard, and a paver patio washed aggressively will need re-sanding and may shift. Stamped and colored concrete has its color in a thin surface layer that strips. Sealed surfaces cloud. We drop pressure for all of it and tell you upfront when the honest answer is that a surface should be cleaned gently and resealed rather than blasted clean. We service Stetson Estates on our regular Meridian route.
Most Stetson Estates customers book this alongside house washing. Partly that is price — one visit rather than two — and partly it is sequence. Washing walls after cleaning glass puts dirty water back on clean panes, and hanging lights before clearing gutters means working around your own strands in January. We handle the order so you do not have to think about it.
Pressure removes dirt. It does not remove deep oil that has soaked into the slab, it will not restore spalled or crumbling concrete, and we will not blast colour off stamped or sealed surfaces to make a before-and-after look better. Reflekt has been operating since April 2025, which is a shorter history than some of the companies you may be comparing us against. We would rather you knew that up front.
Free, no-obligation quote — we'll call or text you with your price.
Get My Free QuoteStill wondering about something? Call or text us at (208) 453-6760.
Not done properly. Damage comes from a narrow tip held too close, which etches the surface permanently. A rotary surface cleaner at appropriate pressure does not do that. Pavers and stamped concrete get lower pressure by default.
Usually, yes — but with chemistry rather than pressure. Iron staining from irrigation water needs an acid treatment and a neutralizing rinse. It is quoted separately from the wash because it is genuinely separate work.
$0.20 per square foot for standard flatwork. Rust and mineral treatments are quoted on top after we see them. Booking it alongside house washing saves a trip.
An outside spigot, yes. We bring our own equipment and power. If your spigot is on the irrigation system rather than city water, let us know — we need the treated line.
Free, no-obligation quote. Next-day slots available.
Get My Free Quote