Most of what faces the street along Warm Springs Avenue is 1890s to 1910s wood double-hung — true divided lites, wavy original glass, transoms over the entry, leaded panels at the stair landings. Behind that glass are steep two- and three-story elevations in original or replicated half-round gutter, which is about as far from a standard suburban light install as this valley gets.
These are Queen Anne, Colonial Revival and Shingle-style houses built when Warm Springs was the address in Boise, and the rooflines were drawn for steep-pitch drainage rather than for anyone to work on. A front elevation commonly stacks a porch roof, a main eave, a dormer band and a peak, and on the larger houses the back elevation runs a full story taller than the front. The gutter is frequently original or replicated half-round, which takes shingle-tab or ridge clips rather than the K-style gutter clip that fits most of the valley. Every one of those details is a reason a per-foot phone quote would be wrong here, in one direction or the other.
The pitch on these houses means the work happens off ladders with standoffs instead of walking the roof, so shingles, slate and ridge stay untouched. That is slower than a crew walking a 4:12 suburban roof and it is the only responsible way to do it — a slate or old wood-shingle field is not something to be learning about in November. The mature canopy along this stretch is the other factor: silver maple, Norway maple, linden and old American elm carry heavy aphid loads and drop late, which is why we book gutter work here after the drop finishes and sequence lights around it rather than hanging over a packed half-round trough.
Every attachment point is a plastic clip. No staples, no nails, no screws, no adhesive — and on Warm Springs Avenue the reason is sitting right in front of you. Painted wood fascia that has been in service since before electric lights were common is a water path waiting to happen: a staple hole takes on moisture, freezes, and you find out two summers later when the paint blisters and the board underneath is soft. Original or replicated half-round gutter does not take a standard K-style clip either, so those runs get shingle-tab or ridge clips sized for what is actually there rather than something forced onto a lip it was never made for. Worth checking yourself before you hire anyone here: walk your front eave in daylight and look for the rusted nail heads and staple punctures a previous installer left behind.
One number covers the whole season: commercial-grade C9 or mini LED strands supplied by us and cut to your roofline, clip-only installation, mid-season fixes at no charge if a section goes dark, takedown in January, and off-season storage where the set is inspected and repaired before next year. There is no box of lights to buy and no second invoice in January. The honest limit: if your house is a single-story with a straight, reachable front eave and you are genuinely steady on a ladder, hanging your own is a reasonable weekend project and we would rather say so here than after a quote. On Warm Springs Avenue, the homes that actually need a crew are the two- and three-story elevations, the steep pitches, and anything where the ladder would have to lean on century-old trim.
Call in October or the first week of November. Installs go cleanest on a dry roof above freezing, and routes genuinely fill by mid-November — we install through December for late deciders, but the good pre-Thanksgiving slots go first. On Warm Springs Avenue there is a second reason to book early: the mature canopy overhead does not finish dropping until late in the fall, and clipping a run over a gutter still packed with leaves means ice sitting on your lights in January. If your gutters have not been cleared yet, say so when you call and we will sequence the two jobs in the right order rather than working around a full trough.
Free, no-obligation quote — we'll call or text you with your price.
Get My Free QuoteStill wondering about something? Call or text us at (208) 453-6760.
Never. Every attachment is a plastic clip on the gutter lip, shingle edge or ridge, and it comes off in January leaving nothing behind. On a house of this age a staple hole is a genuine water path into wood that is irreplaceable at any realistic price, and no seasonal display is worth that trade.
No. On this pitch we work off ladders with standoffs so no weight goes onto the roof field or the gutter. It takes longer and it is the reason a Warm Springs quote reflects the elevation rather than the linear footage — which we would rather explain up front than discover halfway through install day.
We supply them. Every install uses commercial-grade C9 or mini LED strands custom-cut to your roofline. We do not hang store-bought strands — a roof in December is the wrong place to find out a four-year-old set has a dead section, and supplying the lights ourselves is what lets us include mid-season fixes in the quote.
No. Every attachment point is a plastic clip matched to what you actually have — gutter lip, shingle edge or ridge. Nothing is stapled, nailed, screwed or glued. When the lights come down in January there is no evidence they were ever up, which is the whole standard.
Call or text (208) 453-6760 and we come fix it at no charge. That is part of the job, not a separate service call. Commercial-grade strands fail far less than store strings, but wind, squirrels and one crushed bulb still happen — you should not spend a Saturday diagnosing it on a ladder.
We come back, take everything down, and store your set through the off-season, where it gets inspected and repaired before next year. No bins in the garage, no untangling next November, and no second invoice — takedown and storage are already in the quote.
Free, no-obligation quote. Next-day slots available.
Get My Free Quote